Tag Archives: Binary numeral system

Computer Algorithms: Adding Large Integers

algorithms, , , , , , , , , , , ,

Introduction

We know how to add two integers using a perfectly simple and useful algorithm learned from school or even earlier. This is perhaps one of the very first techniques we learn in mathematics. However we need to answer few questions. First of all do computers use the same technique, since they use binary representation of numbers? Is there a faster algorithm used by computers? What about boundaries and large integers?

Overview

Let’s start by explaining how we humans add two numbers. An important fact is that by adding two single-digit numbers we get at most two digit number. This can be proven by simply realizing that 9+9 = 18. This fact lays down in the way we add integers. Here’s how.

We just line-up the integers on their right-most digit and we start adding them in a column. In case we got a sum greater than 9 (let’s say 14) we keep only the right-most digit (the 4) and the 1 is added to the next sum.

Thus we get to the simple fact that by adding two n-digit integers we can have either an n-digit integer or a n+1 digit integer. As an example we see that by adding 53 + 35 (two 2-digit integers) we get 88, which is again 2-digit integer, but 53 + 54 result in 107, which is 3 digit integer.

That fact is practically true, as I mentioned above, for each pair of n-digit integers.

What about binary numbers?

In fact binaries can be added by using the exact same algorithm. At the example below we add two integers represented as binary numbers.

As a matter of fact this algorithm is absolutely wonderful, because it works not only on decimals and binaries but in any base B.

Of course computers tend to perform better when adding integers that “fit” the machine word. However as we can see later this isn’t always the case and sometimes we need to add larger numbers that exceed the type boundaries.

What about big integers?

Since we know how to add “small” integers, it couldn’t be so hard to apply the same algorithm on big integers. The only problem is that the addition will be slower and sometimes (done by humans) can be error prone.

So practically the algorithm is the same, but we can’t just put a 1 billion integer into a standard computer type INT, right? That means that the tricky part here is the way we represent integers in our application. A common solution is to store the “big” integer into an array, thus each digit will be a separate array item. Then the operation of addition will be simple enough to be applied.

Complexity

When we talk about an algorithm that is so well known by every human being (or almost every) a common question is “is there anything faster” or “do computers use a different algorithm”. The answer may be surprising to someone, but unfortunately that is the fastest (optimal) algorithm for number addition.

Practically there’s nothing to optimize here. We just read the two n-digit numbers (O(n)), we apply “simple” addition to each digit and we carry over the 1 from the sums greater than 9 to the next “simple” addition. We don’t have loops or any complex operation in order to search for an optimization niche.

Application

It’s strange how often this algorithm is asked on coding interviews. Perhaps the catch is whether the interviewed person will start to look for a faster approach?! Thus is cool to know that this algorithm is optimal.

Sometimes we may ask ourselves why we humans use decimals. It’s considered because we have 10 fingers on our hands and this is perhaps true.

An interesting fact though, is that the Mayas (who barely predicted the end of the world a couple of weeks ago) used a system of a base 20. That is logical, since we have not 10, but total of 20 fingers considering our legs.

Finally, this algorithm may seem to easy to be explained but it lays down in more complex algorithms.

Computer Algorithms: Sorting in Linear Time

algorithms, , , , , , , , , , , , , , , , , , ,

Radix Sort

The first question when we see the phrase “sorting in linear time” should be – where’s the catch? Indeed there’s a catch and the thing is that we can’t sort just anything in linear time. Most of the time we can speak on sorting integers in linear time, but as we can see later this is not the only case.

Since we speak about integers, we can think of a faster sorting algorithm than usual. Such an algorithm is the counting sort, which can be very fast in some cases, but also very slow in others, so it can be used carefully. Another linear time sorting algorithm is radix sort.

Introduction

Count sort is absolutely brilliant and easy to implement. In case we sort integers in the range [n, m] on the first pass we just initialize a zero filled array with length m-n. Than on the second pass we “count” the occurrence of each integer. On the third pass we just sort the integers with an ease.

However we have some problems with that algorithm. What if we have only few items to sort that are very far from each other like [2, 1, 10000000, 2]. This will result in a very large unused data. So we need a dense integer sequence. This is important because we must know in advance the nature of the sequence which is rarely sure.

That’s why we need to use another linear time sorting algorithm for integers that doesn’t have this disadvantage. Such an algorithm is the radix sort.

Overview

The idea behind the radix sort is simple. We must look at our “integer” sequence as a string sequence. OK, to become clearer let me give you an example. Our sequence is [12, 2, 23, 33, 22]. First we take the leftmost digit of each number. Thus we must compare [_2, 2, _3, _3, _2]. Clearly we can assume that since the second number “2” is only a one digit number we can fill it up with a leading “0”, to become 02 or _2 in our example: [_2, _2, _3, _3, _2]. Now we sort this sequence with a stable sort algorithm.

What is a Stable Sort Algorithm

A stable sort algorithm is an algorithm that sorts a list by preserving the positions of the elements in case they are equal. In terms of PHP this means that:

array(0 => 12, 1=> 13, 2 => 12);

Will be sorted as follows:

array(0 => 12, 2 => 12, 1 => 13);

Thus the third element becomes second following the first element. Note that the third and the first element are equal, but the third appears later in the sequence so it remains later in the sorted sequence.

In the radix sort example, we need a stable sort algorithm, because we need to worry about only one position of digit we explore.

So what happens in our example after we sort the sequence?

As we can see we’re far from a sorted sequence, but what if we proceed with the next “position” – the decimal digit?

Than we end up with this:

Now we have a sorted sequence, so let’s summarize the algorithm in a short pseudo code.

Pseudo Code

The simple approach behind the radix sort algorithm can be described as pseudo code, assuming that we’re sorting decimal integers.

1. For each digit at position 10^0 to 10^n
1.1. Sort the numbers by this digit using a stable sort algorithm;

The thing is that here we talk about decimal, but actually this algorithm can be applied equally on any numeric systems. That is why it’s called “radix” sort.

Thus we can sort binary numbers, hexadecimals etc.

It’s important to note that this algorithm can be also used to sort strings alphabetically.

[ABC, BBC, ABA, AC]
[__C, __C, __A, __C] => [ABA, ABC, BBC, AC]
[_B_, _B_, _B_, _A_] => [AC, ABA, ABC, BBC]
[___, A__, A__, B__] => [AC, ABA, ABC, BBC]

That is simply correct because we can assume that our alphabet is another 27 digit numeric system (in case of the Latin alphabet).

Complexity

As I said in the beginning radix sort is a linear time sorting algorithm. Let’s see why. First we depend on the numeric system. Let’s assume we have a decimal numeric system – then we have N passes sorting 10 digits which is simply 10*N. In case of K digit numeric system our algorithm will be O(K*N) which is linear.

However you must note that in case we sort N numbers in an N digit numeric system the complexity will become O(N^2)!

We must also remember that in order to implement radix sort and a supporting stable sort algorithm we need an extra space.

Application

Sorting integers can be faster than sorting just anything, so any time we need to implement a sorting algorithm we must carefully investigate the input data. And that’s also the big disadvantage of this algorithm – we must know the input in advance, which is rarely the case.